Start Up; Setting Up Without Wi-Fi (Temporary Mode); Setup And User Registration With Wi-Fi Network - Alpha Smartech Plus Instructions Manual

4

START UP

4.1

SETTING UP WITHOUT WI-FI (TEMPORARY MODE)

This temporary mode is only used to set up the thermostat according to the type of system on first start-up, if there is no
Internet connection available.
The following temporary mode will remain active until the batteries are removed from the Smartech, bringing the system
back into the default mode.
Note: For the system to be optimised the User registration procedure must be completed via the Smartech App (Section 4.2).
Follow the procedure below:
• Connect the Gateway receiver to the system and power it on;
• Insert the batteries in the Smartech unit;
• Once the Alpha logo is displayed, keep the Smartech pressed until the list of systems is displayed;
• Rotate the Smartech to the desired type of system;
• Press the Smartech to confirm.
4.2 SET-UP AND USER REGISTRATION WITH WI-FI NETWORK
1. Application download and installation on mobile devices (Smartphone)
Using the mobile device on which to install the application, connect to the App store of reference: App Store (Apple) or Play
Store (Android) and type in 'Smartech' in the search field.
The app works with IOS 12 operating system or higher (Apple) and Android 10 or higher.
Note: The Wi-Fi network which the Smartech is connected to must have WPA2 PSK encryption, otherwise there might be
some incompatibility.
2. Creating the account
Start the 'Smartech' app.
The following screen appears on the display of the mobile device when the app starts up, allowing you to login (Fig.4.1), or
create a new account (Fig.4.2).
Fig. 4.1 Fig. 4.2
Alpha Smartech Plus - Start Up
5