Desired Room Temperature Setting; Temporary Manual Operation; Manual Mode - Alpha Smartech Plus Instructions Manual

6 ROOM TEMPERATURE SETTING
The room temperature detected by the sensor within the Smartech Plus thermostat is indicated at the centre of the display.
The set temperature, which can be changed by rotating the head of the device, is displayed under the detected temperature.
The desired room temperature can be changed quickly by rotating the thermostat body.
The desired value is enlarged when changing the value for clarity.
6.1

TEMPORARY MANUAL OPERATION

If the 'PROGRAM ON' mode is activated (automatic operation mode, see Section15), by manually changing the desired
room temperature, the device is forced into temporary manual operation, i.e. the set temperature remains active until the next
activation time band. See Fig. 6.1.
6.2

MANUAL MODE

If the 'PROGRAM OFF' mode is activated (manual operation mode, see Section 16) the new room temperature selected
remains active until the a new value is set or the program mode is changed. See Fig. 6.2.
FRI 12:08
20
15°
21.5
FRI 12:08
22
15°
Fig. 6.1
°
.
4
20.4
°
.
5
FRI 12:08
20
15°
21.5
FRI 12:08
22
15°
Alpha Smartech Plus - Room Temperature Setting
°
.
4
20.4
°
.
5
Fig. 6.2
11