Motorola CDM Series Detailed Service Manual page 545

Chapter 4
UHF BAND 2 (450–512/520 MHZ) 25–40 W BIPOLAR
PCBS, SCHEMATICS, AND PARTS LISTS
1.0 Allocation of Schematics and Circuit Boards
1.1 Controller Circuits
The UHF circuits are contained on the printed circuit board (PCB) which also contains the controller
circuits. This chapter shows the schematics for the UHF circuits only. Refer to the controller section
for details of the related controller circuits. The PCB component layouts and the parts lists in this
chapter show both the controller and UHF circuit components. The UHF schematics and the related
PCB and parts list are shown in the tables below.
Table 10-1 UHF Band 2 25–40W PCB 8480645Z04 Diagrams and Parts Lists
PCB 8480645Z04:
Main Board Top Side
Main Board Bottom Side
SCHEMATICS
Power Amplifier 40W
FRACN Synthesizer
Voltage Controlled Oscillator
Receiver Front-End
IF
Parts List
Controller version is T6/7
Page:
10: 4-3
10: 4-4
10: 4-5
10: 4-6
10: 4-7
10: 4-8
10: 4-9
10: 4-10
Section 10: 4-1
6881091C63-F