Starting Web Management - Planet LRP-422CST Quick Installation Manual

Industrial 4-port coax + 2-port 10/100/1000t + 2-port 100/1000x sfp long reach poe over coaxial managed switch

Table of Contents

8. Starting Web Management

The following shows how to start up the Web Management of the LRP Managed

Switch. Note the LRP Managed Switch is configured through an Ethernet

connection. Please make sure the manager PC must be set on the same IP

subnet address.

For example, the default IP address of the LRP Managed Switch is 192.168.0.100,

then the manager PC should be set at 192.168.0.x (where x is a number

between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.

PC / Workstation

with Web Browser

192.168.0.x

Managed Switch

RJ45/UTP Cable

IP Address:

192.168.0.100

Figure 8-1: IP Management Diagram

Table of Contents