Starting Long Reach Poe Communication - Planet LRP-422CST Quick Installation Manual

9. Starting Long Reach PoE Communication

The following shows how to start up the Long Reach PoE Communication of the
LRP Managed Switch from Web Management.
The LRP Managed Switch is configured DISABLED Long Reach PoE
function as default.
Note
 Connect the Coaxial Cable
1. Insert the coaxial cable with one side being the 75ΩBNC plug connector into the
Long Reach Ethernet coaxial interface.
2. Connect the other end of the cable to a device with Long Reach Ethernet
coaxial extender installed.
3. Tighten the BNC male connector gently.
2
LRP-422CST
14
1
5C2V/RG6 75Ω Coaxial Cable
RJ45
Long Reach Power over Ethernet
LRP-101CE
PoE PT Camera