Planet LRP-422CST Quick Installation Manual page 15

4. Enable Long Reach Power over Ethernet function for the all LRP ports from
WebUI.
5. Check the LNK LED of the Long Reach Power over Ethernet interface on the
front of the LRP Managed Switch. Ensure that the Long Reach Power over
Ethernet interface is operating correctly.
1. Before installation, please consider the distance and watts
value demand for PD devices. The LRP Managed Switch and
LRP Extender PoE output capacity and upload/download
performance depend on the length of coaxial cable. You can
refer to user's manual in chapter 1.5 for the information.
Note
2. As there are various resistance values in the category of
RG-59/U or RG-6/U cable, the actual data rate will vary on the
quality of the copper wire and environmental factors.
15