Starting Web Management; Logging In To The Industrial Managed Switch - Planet IGS-6325-4UP2X Quick Installation Manual

Industrial l3 multi-gigabit/10gigabit managed ethernet switch
Table of Contents

Advertisement

5. Starting Web Management

The following shows how to start up the Web Management of the Industrial
Managed Switch. Note the Industrial Managed Switch is configured through an
Ethernet connection. Please make sure the manager PC must be set to the
same IP subnet address.
For example, the default IP address of the Industrial Managed Switch is
192.168.0.100, then the manager PC should be set to 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
IP Address: 192.168.0.x

5.1 Logging in to the Industrial Managed Switch

1. Use Chrome 98.0.xxx or above for Web browser and enter IP address
https://192.168.0.100 (the factory-default IP address) to access the Web
interface.
12
RJ45/UTP Cable
Figure 5-1: IP Management Diagram
IGS Industrial Managed Switch
IP Address: 192.168.0.100

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-6325-4t2xIgs-6325-5x1t

Table of Contents