LAMAX Sounder2 Manual
Also See for Sounder2:

Advertisement

LAMAX Sounder2 Manual

Controls

Controls

  1. VOLUME
    Volume control knob (clockwise +, anticlockwise – )
  2. POWER
    Power on / off (hold)
    Switch between Super bass and 3D sound modes (press)
  3. VOL +
    Volume (press), next track (hold)
  4. PLAY
    Play / pause (press)
    Answer / end call (press), reject call (hold), last number redial (double tap)
    Force pairing mode (hold)
    Force shutdown (long hold, 8s)
  5. VOL –
    Volume down (press), previous track (hold)
  6. MODE
    Switch music sources (Bluetooth, microSD card and AUX) (press)
    Turn on / off TWS pairing (hold)
    Factory settings (long hold, 8s)

Other

  1. LED
  2. Microphone
  3. MicroSD slot
  4. Aux / USB-C

LED Indicators

Blinking Ready for pairing

Lit Paired (stand by)

Blinking (slowly) Playback

LED is coloured according to the audio mode

Blue Super bass

White 3D Sound

Charging indicators

When charging, the status LED lights up red, when fully charged it lights up green.

Main Features

  • Total power of 30 W
  • IP67 water resistance
  • Built-in rechargeable lithium battery with a capacity of 4000 mAh, which can handle 12 hours on a single charge
  • TWS for pairing with a second identical speaker

Power On / Off

To turn on the speaker, press and hold the POWER button. The LED lights up and a beep sounds. Hold down the same button to turn off the speaker.

Pairing

  1. Turn on the speaker by holding down the POWER button. The LED starts blinking and the speaker is ready to pair.
  2. Activate the Bluetooth connection on your phone or other device. Select "LAMAX Sounder2" from the list of available devices. When pairing is successful, the speaker emits a sound and the LED lights up.
  3. Playback can be controlled either by the paired device or directly on the speaker itself. The LED blinks slowly during playback.

TWS

To pair two speakers, turn on both speakers and make sure they are not paired with the multimedia device. On one of them, which will be the main one, press and hold the MODE button until a beep sounds. After successful pairing, a second beep sounds and the main speaker acts as the left channel.

To unpair the speakers, hold the same MODE button on the main speaker.

Audio Input

By connecting to the AUX jack via the supplied audio cable, you can play music from any device. When playing back through the audio input, you cannot control the tracks directly on the speaker.

Handsfree

When pairing your phone via Bluetooth, the handsfree function is activated. To answer / end the call, press PLAY, reject the incoming call by holding down PLAY and double tap PLAY to redial the last dialled number.

Charging

The speaker can be charged using the supplied USB cable from a suitable USB device – adapter, PC, power bank. Do not charge the speaker with an input voltage higher than 5V, as the speaker may be damaged. An audible signal sounds when the battery is running low. When charging, the LED lights up red and when fully charged, the LED lights up green.

Parameters

Speaker 2 × 15 W, Φ 48 mm, 115 Hz–20 kHz

Battery Li-Ion 4000 mAh

Playback time up to 12 hours

Charging time 3 hours

Playback options Bluetooth, 3.5 mm audio, microSD card

Wireless technology Bluetooth 5.0

Water resistance IP67 – withstands immersion up to 1 m in standing water for 30 min.

Dimensions 180 × 75 × 75 mm

Weight 600 g

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download LAMAX Sounder2 Manual

Advertisement

Need Assistance?

Do you have a question about the Sounder2 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents