Advertisement
Blinking | Ready for pairing |
Lit | Paired (stand by) |
Blinking (slowly) | Playback |
Blue | Super bass |
White | 3D Sound |
When charging, the status LED lights up red, when fully charged it lights up green.
To turn on the speaker, press and hold the POWER button. The LED lights up and a beep sounds. Hold down the same button to turn off the speaker.
To pair two speakers, turn on both speakers and make sure they are not paired with the multimedia device. On one of them, which will be the main one, press and hold the MODE button until a beep sounds. After successful pairing, a second beep sounds and the main speaker acts as the left channel.
To unpair the speakers, hold the same MODE button on the main speaker.
By connecting to the AUX jack via the supplied audio cable, you can play music from any device. When playing back through the audio input, you cannot control the tracks directly on the speaker.
When pairing your phone via Bluetooth, the handsfree function is activated. To answer / end the call, press PLAY, reject the incoming call by holding down PLAY and double tap PLAY to redial the last dialed number.
The speaker can be charged using the supplied USB cable from a suitable USB device – adapter, PC, power bank. Do not charge the speaker with an input voltage higher than 5V, as the speaker may be damaged. An audible signal sounds when the battery is running low. When charging, the LED lights up red and when fully charged, the LED lights up green.
Speaker | 2 × 25 W, Φ 52 mm, 80 Hz – 20 KHz |
Battery | Li-Ion 8000 mAh |
Playback time | up to 20 hours |
Charging time | 3 hours |
Playback options | Bluetooth, 3.5 mm audio |
Wireless technology | Bluetooth 5.0 |
Water resistance | IP67 |
Dimensions | 225 × 88 × 88 mm |
Weight | 853 g |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Sounder2 Max that isn't answered in the manual? Leave your question here.