LAMAX SOUL1 Manual

Also See for SOUL1:

User manual (2 pages)

Table of Contents

Contents

1 Overview
2 Controls
3 LED Indicators
4 Switching On/Off
5 Pairing
6 Audio Connection
7 Handsfree
8 Charging
9 Reset
10 TWS Function
11 Main Features
12 Parameters
13 Documents / Resources
- 13.1 References
- 13.2 Download manual

LAMAX SOUL1 Manual

Overview

Controls

1	VOL -	Decrease volume (press), previous track (hold)
2	VOL +	Increase volume (press), next track (hold)
3	PLAY	Play / pause (press), accept / end call (press), decline call (hold) redial previously called number (double tap)
4	POWER	Switch on / off (equipment)

LED Indicators

Ready to be paired – LED 1 blinks blue
Pairing – LED 1 blinks blue every 5 seconds
Playing through audio cable – LED 1 blinks blue
Discharged battery – LED 2 blinks red
Charging – LED 2 blinks red
Fully-charged – LED 2 stops blinking red

Switching On/Off

Use the POWER button to switch the speaker on. The on/off indicator will light and an audible signal will be heard. The speaker can be switched off by holding down the same button.
An unpaired speaker will switch itself off after 10 minutes of inactivity.

Pairing

Switch the speaker on by holding down POWER. The LED will begin blinking blue and the speaker is ready to be paired
On a mobile phone or other device turn on Bluetooth. Search for "LAMAX Soul1" on the list of available devices. On successful pairing, the speaker will emit a sound and the LED will begin to blink blue every 5 seconds.
To reattempt pairing press POWER. The LED will begin blinking blue and then repeat step 2.

Audio Connection

By plugging in the AUX socket with the supplied audio cable, you can play music from any device. When playing through the audio input, it is not possible to control the tracks directly from the speaker.
Pressing the POWER button during playback via the audio cable puts the speaker back into Bluetooth pairing mode.

Handsfree

When pairing your phone with Bluetooth, the handsfree function is activated. To answer / end the call, press the PLAY button, reject the incoming call by holding down PLAY, and double-tap PLAY to redial the last number.

Charging

The speaker can be charged by plugging the supplied USB cable into a suitable USB port. Do not charge the speaker with a higher input voltage than 5V, as this may damage the equipment.

Reset

If the speaker stops responding, insert a paper clip (or other similar object) into the RESET socket and gently press the button inside. The speaker will turn off. In the case of pairing difficulties, press the RESET button in the same manner and hold for a few seconds. The speaker will turn off and restore the factory default settings.

TWS Function

Turn on the two speakers you want to pair. Press the PLAY button on the same speaker as the master. The MASTER speaker is connected as the left stereo channel, the SLAVE speaker as the right stereo channel.
When pairing the speakers for the first time, ensure your media device is disconnected.

Main Features

Overall output 35 W
Two main speakers complemented by an active subwoofer produce deep bass
Elegant wooden design
Bluetooth 4.2 with a 10 metre range
Possibility to play through audio cable
4400 mAh capacity battery lasts up to 12 hours playback time on a single charge
Built-in microphone enabling easy calling
Battery saver function
TWS (True Wireless Stereo) function enabling two speakers to be paired together. One speaker will act as the right channel and one as the left.

Parameters

Speaker parameters	1 × Φ 90 mm, 6 Ω + 2 × Φ 42 mm, 4 Ω, 20Hz ~ 20 KHz
Battery	Li-Ion 4400 mAh
Continuous play time	Up to 12 hours
Charging duration	3 hours (at 5 V / 2 A)
Connectivity options	Bluetooth, audio jack 3.5 mm, Micro SD
Wireless technology	Bluetooth 4.2
Pairing distances	Up to 10 metres
Handsfree	Integrated speakers and microphone, speaker controls
Dimensions	240 × 130 × 80 mm
Weight	1390 g
Operational and storage	From -15°C – up to +50°C