Honeywell SV2 Series User Manual page 209

Category Item
Valve (6) NEMA 4/IP66 wiring
enclosure ports,
(Continued) ½ in (1.27cm) flex conduit
(6) NEMA 4/IP66 wiring
ports,
½ in (1.27cm) NPT low
voltage cord grip for RS-485
Modbus wiring,
Lock nut to the cord grip or
factory provided plugs
(6) NEMA 4/IP66 wiring
ports,
½ in (1.27cm) NPT low
voltage cord grip for RS-485
Modbus wiring,
Cord grip sealing nut around
the cord
(6) NEMA 4/IP66 wiring
ports,
M16x1.5 low voltage cord
grips or factory provided
plugs.
Includes field PRESSURE
connector, factory SOLENOID
1/2, POC 1/2 and CHASSIS
GROUND wire cord grips.
Flange to ¾ and 1 in
valve body
(DN20 and DN25)
1 ½ and 2 in
(DN40 and DN50)
C6097 Module to valve body
pressure
NEMA 4/IP66 wiring port low
switch
voltage M16x1.5 cord grip
Pressure
(Pressure Module only)
Module
SV2 Series Safety Shut-off Valves
V2F, V2V
Picture
M37174
LGP HGP
Open
Fault
Self Test Reset
Closed
209
SV2 SERIES SAFETY SHUT-OFF VALVES USER MANUAL
Maximum Tightening
Torque
Nm
Torque hardware
to manufacturer's
recommended
requirements
4.5-5.1
5.6-6.2
3.7-4.3
Open
Closed
3.4
13.5-14.5
1.8-2.2
3.7-4.3
In-lbf
40-45
50-55
33-38
30
120-128
16-20
33-38