Honeywell SV2 Series User Manual page 20

SV2 Series Safety Shut-off Valves
CHAPTER 2 : VALVE FEATURES
Overview
The SV2 Series valves have two safety shut-off valve seats integrated into a single valve body. They also contain many unique
features. Below is an overview of the various valve features.
VALVE INTERFACE
PRESSURE MODULE
(OPTIONAL)
PRESSURE MODULE
ELECTRICAL CORD
NEMA 4/ IP66
WITH CONDUIT
CONNECTIONS
WIRING PORTS
(6) FOR 1/2 INCH 1.27 CM CONDUIT
(6) M16X1.5 LOW VOLTAGE CORD GRIPS
FLANGES, NPT OR BSP
(ORDERED SEPARATELY)
NOTE: NEMA 4 / IP66 solenoid covers contain vents to dissipate heat build-up created by the solenoids when powered.
Vent sizing meets the requirements for preventing finger intrusion into the space. The solenoid casings themselves,
housed inside the solenoid cover, meet NEMA 4 / IP66 requirements.
20
ELECTRICAL ENCLOSURE
FASTENER TABS
FLANGE PRESSURE TOP
[1/8 IN (3 MM) NPT OR BSP]
MCR37136
SOLENOID COVER
ELECTRICAL ENCLOSURE
MOUNTING LOCATION
(BOTH SIDES)
FLANGE PRESSURE TOP
[1/8 (3) NPT OR BSP]
PRESSURE PORT COVERS
NOVV CONNECTION (NORMALLY
OPEN VENT VALVE) (BOTH SIDES)
MCR37137
32-00029—02