Advantech ADAM-4570W User Manual page 58

2-port rs-232/422/485 to wlan data gateway, 1-port rs-232/422/485 to wlan data gateway

Table of Contents

Reset the Network setting as needed. (About Network setting,

please refer to section 3.2.3 of the manual)

Power off ADAM-4570W/4571W, adjust the switch to Normal Mode,

then reboot it to finish the wireless connection. Now you can configure

and set up port mapping through the access point (You can connect to the

access point by WLAN or Ethernet).

ADAM-4570W & 4571W User Manual

Table of Contents

Adam-4571w