Table of Contents
Advertisement
4.
Lift the side of the board up to approximately 20°, and then pull the board out from under the USB
bracket (4).
To install the SIM board, reverse this procedure.
NOTE:
When replacing the SIM board, be sure to insert the board under the USB bracket.
WWAN module
To remove the WWAN module, use this procedure and illustration.
Table 5-5
WWAN module descriptions and part numbers
Description
Intel 5000 5G Solution WWAN
Intel XMM 7560 R + LTE-Advanced Pro WWAN (Cat 16)
WWAN card rubber (included in Rubber Kit)
WWAN module bracket (available in the Bracket Kit)
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WWAN module, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the WWAN module:
To prevent an unresponsive system, replace the wireless module only with a wireless module
Bottom cover on page
Preparation for disassembly on page
33).
Battery on page
Spare part number
N00181-005
N00182-005
N22933-001
N22931-001
33).
42).
WWAN module
39
Advertisement
Table of Contents
