BIOS Recovery Jumper: J9
Users can short connect pin#2-3 to recover the system BIOS. W hen the system is
done with the job, the buzzer will beep to remind users to set the jumper to its normal
state (pin#1-2 short connected).
PCI-X Jumpers: J3, J4
These jumpers control the operation frequency of the onboard PCI-X slot. Short
connect the J3 jumper will force the PCI-X to run at 66MHz. Short connect the J4
jumper will force the PCI-X to run at 133MHz.
PCI Express Jumpers: JPCIE2_1, JPCIE2_2
Under normal operation, short connect pin# 1-2. When an MSI proprietary SAS card
is intended, short connect pin#2-3.
1
JPCIE2_1
JPCIE2_2
1
J9
Normal
J3
66MHz
J4
133MHz
1
Normal
1
Normal
Hardware Setup
1
1
3
3
Recovery
100 or 133MHz
100MHz
1
Special
1
Special
1
2-17