Jumper; Slots - MSI MS-S0361 Manual

▍
Hardware Setup

Jumper

Clear CMOS Jumper: JBAT1
There s a CMOS RAM onboard that has a power supply from an external battery to
keep the data of system configuration. With the CMOS RAM, the system can automati-
cally boot OS every time it is turned on. If you want to clear the system configuration,
set the jumper to clear data.
1
1 1
JBAT1
Normal Clear CMOS
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2
pin position. Avoid clearing the CMOS while the system is on; it will damage the main-
board.

Slots

PCIE (Peripheral Component Interconnect Express) Slot
The PCI Express slot supports the PCI Express interface expansion card.
PCIE x1 Slot
Important
When adding or removing expansion cards, make sure that you unplug the power sup-
ply first. Read the documentation for the expansion card to configure any necessary
hardware or software settings, such as jumpers, switches or BIOS configuration.
2-16