Specifications - Jensen JBS-300 User Manual

CD player will not
play
CD skips while
playing
Intermittent sound
from CD Player
Sound is distorted
Unit gets warm
after extended
play at high
volume
Power requirement:
Power
Remote control:
Frequency Range
Radio Band:
Bluetooth:
USB PORT
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Spectra Merchandising Intl, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
Unit not in CD function mode. CD
is installed incorrectly.
If the CD is self-compiled, the
media used may not be compatible
with the player.
Disc is dirty or scratched.
Dirty or defective disc.
Dirty pick up lens.
Player is subject to excessive
shock or vibration.
Volume level is set
too high.
Sound source is distorted.
This is normal.

SPECIFICATIONS

AC Adaptor:
Input AC 100-240V ~
Output: DC 9V
2 x AAA (UM-4) Batteries
FM 87.5 ~ 108 MHz
AM 520 – 1710 KHz
Version 5.0
Support FAT 32 format, up to 128GB USB thumb drives.
Select CD function mode. Insert
CD with label facing to the CD
door.
Use better quality blank
media and retest.
Wipe CD with clean cloth or
use another disc.
Clean or replace the
defective disc.
Use a CD-lens cleaning disc
to clean the lens.
Relocate the player away
from shock or vibration.
Decrease the volume.
Try a different sound
source.
If you are using an external
sound source like older
generation of iPod, try
reducing the output volume
on the device itself. Also try
turning bass boost OFF or
change the EQ setting.
Turn the unit off for a period
of time or lower volume
2.5A
E-19