Specifications; Troubleshooting Guide - Jensen SMPS-628 User Manual

Power Adaptor:
Battery Back-up:
Bluetooth:
Frequency Range:
Audio Power output:
Dimensions:
PROBLEM
The unit does not
respond (no power)
Unit is ON but there is
low or no volume
No sound when
playing audio via
Bluetooth.
Noise or sound
distorted on FM
broadcast

SPECIFICATIONS

AC input 120V~ 60Hz 10W
DC Output 5V
2 x DC 1.5V UM-4 type batteries (not included)
Bluetooth Specification version 2.1
Support profile A2DP / HFP
FM 87.5 – 108 MHz
2W (RMS) x2
6.6 cm (H) x 23.2 cm (W) x 17.0 cm (D)

TROUBLESHOOTING GUIDE

POSSIBLE CAUSE
The unit is disconnected
from the AC outlet.
The AC outlet has not
power.
The volume control has
been turned all the way
down.
Your Bluetooth device
has not been paired
properly.
The volume control of
your Bluetooth device is
set at too low.
The volume control of
main unit is set at too
low.
Station not turned
properly for FM.
E-11
1.2A
REMEDY
Reconnect to the AC
outlet.
Try the unit on
another outlet.
Turn the volume control
to a higher output.
Pairing your Bluetooth
device again according
to the "BLUETOOTH
OPERATION" section.
Increase the volume of
your Bluetooth device.
Increase the volume of
main unit to adjust
to"+" level.
Retune the FM
broadcast station.