NovaStar VX400 User Manual page 45

Prerequisites

The VX400 is connected to a light sensor.

NovaLCT V5.4.4.6 or later software is installed on the control PC.
Operating Procedure
Step 1 In NovaLCT, go to User > Advanced Synchronous System User Login and log in to NovaLCT.
Step 2 Click Brightness or go to Settings > Brightness to open the brightness configuration page.
Step 3 Select Auto Adjustment to open the automatic brightness adjustment page.
Figure 8-1 Brightness adjustment
Step 4 Click Wizard Settings to open the adjustment type settings page.
Figure 8-2 Setting adjustment type
Step 5 Select Adjust by Light Sensor and click Next to open light sensor settings page.
www.novastar.tech
VX400 All-in-One Controller User Manual
41