290 Chapter 4 Control and function processors
SFP optical module cable assemblies
Optical module compliances
241-1501-200 5.2S2
With an SFP optical transceiver module, use duplex single-mode (SM) or
multimode (MM) fiber optic cables with duplex LC connectors at the FP end
and any other fiber connector at the other end. Only an SM optical fiber cable
(two 9/125 micron SMF) should be used with an SM SFP optical module.
Only an MM optical fiber cable (two 62.5/125 MMF or two 50/125 MMF)
should be used with an MM SFP optical module.
Additional information about LC cables is provided in the description of each
type of FP that uses them.
The SFP optical transceiver modules comply with the following:
•
ANSI TI.646, SONET specification
•
IEEE802.3-2002
•
ITU-T G.957, Optical Interfaces for Equipment and Systems Relating to
SDH
•
LASER Safety FDA Class 1 as per FDA 21, Chapter 1, Sub-chapter J,
Part 1040.10 dated 4-1-03
•
LASER Safety IEC Class 1 as per IEC 60825-1 Edition 1.2 dated
2001-08
•
Telcordia GR-253-CORE, SONET Transport Systems