Structural Changes - Nortel Passport 15000 Hardware Description

• amended the section "Status LEDs of a CP" (page 357) to give more
detail about the LED behaviour of the P0 Ethernet port on the NTHW06
and NTHW08 CP3 cards
• added the spare parts kits as the following tables:
— "Spare parts kit NTQH29AA for a Passport 20000" (page 376)
— "Spare parts kit NTQH29AB for a Passport 20000" (page 377)
— "Spare parts kit NTQH29AC for a Passport 20000" (page 377)
— "Spare parts kit NTQH29AD for a Passport 20000" (page 378)

Structural changes

This document was restructured as follows to improve the usability of the
information.
• moved these sections from this document to 241-5701-615 Passport
7400, 15000, 20000 FP Configuration Reference:
— feature-specific function processor (FP) information
— clocking, configuration, and line rate
— standards compliance information
• added "Passport 15000 or 20000 equipment status" (page 48)
• added "Hardware parts that can be replaced or upgraded" (page 49)
• added "BIMs distributing power to PIMs" (page 56)
• updated "Hardware for connecting power input cables to the BIP"
(page 75)
• updated "Function of the BIP backplane power input connections"
(page 74)
• updated "Using an optional power-and-ground assembly" (page 76)
• added "Grounding the Passport and interworking equipment" (page 85)
• updated "Alarm/BITS module" (page 114)
• added "Connecting a Passport to another node" (page 142)
• added "High-density cable management brackets" (page 320)
Passport 15000, 20000 Hardware Description
About this document 31
5.2S2