4-Port Ds3Ch Atm Fp With Ima Line Connections; 4-Port Ds3Ch Atm Fp With Ima Cable Assemblies - Nortel Passport 15000 Hardware Description

176 Chapter 4 Control and function processors

4-port DS3Ch ATM FP with IMA line connections

4-port DS3Ch ATM FP with IMA cable assemblies

241-1501-200 5.2S2
You can connect the lines (ports) of this DS3 FP directly to the far end
network equipment or another DS3 FP, or indirectly through a termination
panel. Termination panels include the 12-port fanout panel NTHW52, the
one-for-six 12-port sparing panel NTQS31, or the one-for-one 4-port sparing
panel NTHR79. Refer to "Termination panels for FPs" (page 291) for the
description, function, and capabilities of the panels.
The connections can also be made to equivalent non-Nortel Networks
equipment provided the cabling criteria are met.
The maximum cable distance for DS3 lines to customer premises equipment
(CPE) is 137 m (450 ft). The distance between the FP and the termination
panel is part of the total length.
The table "Cable assemblies for a 4-port DS3Ch ATM FP with IMA"
(page 176) lists the available prefabricated cables.
Table 31
Cable assemblies for a 4-port DS3Ch ATM FP with IMA
PEC Description
NTHR58 DS3 male 8W8 mini-coax to male BNC
NTHR59 DS3 male 8W8 mini-coax to male BNC
NTHR60 DS3 male 8W8 mini-coax to male BNC
NTHR72 DS3 male 8W8-to-8W8 male mini-coax
NTHR73 DS3 male 8W8-to-8W8 male mini-coax
NTHR74 DS3 male 8W8-to-8W8 male mini-coax
NTHR69 DS3 DB9 sparing control port
NTHR70 DS3 DB9 sparing control port
NTHR71 DS3 DB9 sparing control port
Length
2.5 m (8 ft)
5 m (16 ft)
15 m (49 ft)
2.5 m (8 ft)
5 m (16 ft)
15 m (49 ft)
2.5 m (8 ft)
5 m (16 ft)
15 m (49 ft)