Fj-X3: Remote Zoom; Remote Fj80 Series Zoom Control [Single Group]; Remote Fj80 Series Zoom Control [All Groups]; Enabling The Modeling Lamp - Westcott FJ-X3 User Manual

FJ-X3: Remote ZOOM

Remote FJ80 Series ZOOM Control [Single Group]

1. Long press the Modeling Lamp icon [
2. Press the up or down arrows on the Control Pad to locate the group for which the ZOOM needs
adjusting.
3. Quick-Press the center button on the Control Pad to adjust the ZOOM setting [0-5}.
4. Press the up or down buttons to adjust the FJ80 ZOOM settings.
5. Press the center button to confirm the FJ80 ZOOM selection.
6. Long-press the Modeling Lamp icon [

Remote FJ80 Series ZOOM Control [All Groups]

1. Long press the Modeling Lamp icon [
2. Long press the Sound Selection Button [
[A-F].
3. Press the Control Pad's center button to adjust the FJ80 ZOOM setting [0-5].
4. Press the up or down arrows on the Control Pad to adjust the FJ80 ZOOM settings.
5. Press the center button again to confirm the FJ80 ZOOM selection.
6. Long press the Modeling Lamp icon [

Enabling the Modeling Lamp

1. Using the Control Pad select the group for which you wish to change the modeling lamp status.
2. Press the Modeling Lamp icon [
3. The Modeling Lamp icon [

Enabling an Audible Beep

1. Using the Control Pad select the group for which you wish to change the audible beep.
2. Press on the [
3. The [ ] icon will be displayed on the screen when active.
NOTE: Control of the audible beep only applies to FJ flash models equipped with the recycle beep
functionality.
] (right) on the Control Pad to enable the Modeling Lamp.
] will be displayed on the screen when active.
] (left) on the Control Pad to enable the audible beep.
] (right) on the Control Pad to enter the ZOOM menu.
] again to return to the Main Menu.
] (right) on the Control Pad to enter the ZOOM menu.
] (left) on the Control Pad to highlight all groups
] again to return to the Main Menu.
15