Page 2
This guide covers setup and basic operation. For video assembly instructions, visit fjwestcott.com/manuals and navigate to the Reflectors and Diffusers section. Included Components (1) Fusion Frame (1) Silver/Sunlight Panel with Removable Window (1) Black/White Panel (1) Full-Stop Diffusion Panel (1) Dual-Speedlight Clamp...
Page 3
• Ensure that all clasps and locking pieces are properly secured during setup. • Ensure all clasps are unlocked during disassembly. • Do not attempt to modify any Westcott products. • Contact Westcott Customer Service for assistance. Assembly Choose a flat, stable surface for the assembly process.
Page 4
10. While supporting the frame with the extended arms resting on the ground, unlock the Rear Support Leg clasp. Locate the tension knob located on the side of the tilter bracket and turn counterclockwise to loosen. 11. Adjust the leg to the desired vertical angle. Tighten the side tension knob and lock the Step 11 clasp to secure into position.
Page 5
Using the Ground Stakes When using the Fusion Light Control System outdoors, its recommended to use the included Ground Stakes to prevent the possibility of injury or product damage in the case of unexpected changes in the environmental conditions. The stakes can also be used to secure the Fusion system on uneven surfaces.
Page 6
Visit FJWESTCOTT.COM for videos, pro tips, inspiration, and more! Westcott products are made to the company’s traditionally high standards of quality and comply with all applicable government safety regulations and requirements. In an effort to provide the best quality products possible, we periodically make product modifications.
Need help?
Do you have a question about the FUSION and is the answer not in the manual?
Questions and answers