Table of Contents
Advertisement
2. Repeatedly press the corresponding Group Selection Button to the left of the Group icon to
cycle through the available exposure modes [SLP, TTL, M].
Change TTL Exposure Compensation
1.
Adjust the Exposure Mode by pressing up or down on the Control Pad until the desired group is
highlighted green.
2. Repeatedly press the corresponding Group Selection Button to the left of the Group icon to
select [TTL] Exposure Mode.
3. Press the center button on the Control Pad to highlight the Group Exposure Box green.
4. Press the up or down arrows to adjust the exposure compensation between -3.0 to 3.0. [NOTE:
This compensation is independent of the onboard exposure compensation available on FJ
Wireless lights.]
Change M (Manual) Exposure Power Output (Individual Group)
1.
Adjust the Exposure Mode by pressing the up or down arrows on the Control Pad until the
desired group is highlighted green.
2. Repeatedly press the corresponding Group Selection Button to the left of the Group icon to
select [M] Exposure Mode.
3. Press the center button on the Control Pad to highlight the Group Exposure Box green.
4. Press the up or down arrows to adjust the manual exposure between 1.0 to 9.0.
NOTE: A long press of the center Control Pad button will highlight the power setting and allow full stop
adjustments.
Change M (Manual) Exposure Power Output (All Manual Groups)
1.
Ensure you are on the FJ-X3's main control screen.
2. Long press the Sound Selection Button [
[A-F].
3. Quick press the center Control Pad button to highlight all Group Exposure Boxes in green.
4. Press the up or down arrows on the Control Pad to adjust the manual exposure for groups
operating in Manual Mode (only).
5. Quick press the center button to confirm the desired manual exposure.
6. Long press the Sound Selection Button [
Group SLP (Sleep) Mode
FJ Wireless lights can be placed into SLP (sleep) mode from any FJ transmitter; disabling the unit's ability
to flash while other flash groups continue operating normally.
1.
Determine the Group [A-F] that the FJ Wireless light is assigned to.
] (left) on the Control Pad to highlight all groups
] again to return to individual group exposure.
12
Advertisement
Table of Contents
