Channel Controls; Change Channels [Ch]; Fj-X3: Syncing; Sync Functions - Westcott FJ-X3 User Manual

2. Press the corresponding Group Selection Button on the FJ-X3 or FJ80 Series's MODE function
icon [HOST mode] continuously until SLP (sleep) appears on the transmitter and flash next to the
Group. NOTE: Any lights assigned to this Group will also enter SLP (sleep) mode.
3. Exit SLP mode by continually pressing the corresponding Group Selection Button or FJ80's
MODE Function icon [HOST mode] until the screen displays TTL or M.
NOTE: It's important that the Exposure Mode setting is updated from the FJ-X3 Wireless Transmitter or
FJ80 [HOST], otherwise, the flash unit(s) will re-enter SLP (sleep) when the next transmission signal is
received from an FJ-X3 transmitter.

Channel Controls

The FJ-X3 offers 32 channels [AU, 01-31] for reliable communication between your FJ-X3 Wireless Trigger
and FJ Wireless lights. This provides multiple connectivity options for users without concern of
interference from additional FJ Wireless lights being used by other photographers in the same area.

Change Channels [CH]

1. Quick press the CH | LOCK Button once to highlight the Channel Icon green.
2. Press the up or down arrows on the Control Pad to select the desired channel option [AU, 01-31].
3. Once the channel has been selected, quick press the center button on the Control Pad and/or
make no further presses to confirm the selected channel. The Channel Icon will turn white after 3
seconds.
NOTE: Enable [AU] (Automatic Channel Selection) by selecting [AU] from the available channels on the
FJ-X3 and FJ Wireless lights. While the middle Selectable Menu Option displays [CH], long-press Last
Group Selection Button on the FJ-X3 to engage communication between the FJ-X3 & FJ Wireless lights.
NOTE: Only one FJ-X3 in AU mode can operate an FJ Wireless Flash System.

FJ-X3: Syncing

Sync Functions

● Front Curtain Sync [icon] – Standard flash operation with shutter speed limitations native to the
camera model. See Sync (Normal) section.
● High-Speed Sync (HSS) [icon] – Flash operation allowing higher shutter speed synchronization up
to 1/8000s. See Sync (HSS) section.
● Rear Curtain Sync [icon] – Flash operation for achieving trailing effects and shutter drag.

Changing the Sync Function

Press the SYNC| MENU repeatedly to select the desired Sync Mode.
● Canon: 1/250s
● Nikon: 1/320s
● Sony: 1/250s
13