Lock Mode Function - Verity Medical NeuroTrac IFC Rehab Operation Manual

5.6. Lock Mode function

A "concealed" Lock buttons are included in the
allows the Physician to accurately monitor the "Home Compliance" of the patient
between appointments. The lock function allows the device to be locked in
two ways (Note: IFC side and TENS/NMS side have lock button therefore can
be locked independently).
L: T � to measure the time in use (over one hour), and the average mA
1.
current used, leaving the programmes and its parameters to be freely
altered by the user.
L: PT � to measure, time in use ( over one hour) , mA current used and
2.
locking the programme and parameters in place, which then cannot be
changed or altered by the patient during use.
Locking the unit.
The Lock buttons will only respond in the "Home" screen. That is when a
programme has been selected and set up ready to start.
Remove the battery cover and, using pin ( i.e lead wire pin) gently press on
the concealed lock button until you hear a double bleep. L: T will appear on
the LCD screen. If you want to lock the parameters as well press the CH2+/�
buttons ( for IFC side) or CHB+/� buttons ( for TENS/NMS side) until L: PT
appears. Press the SET/ESC button to save lock setting and return to home
screen. Once device is locked symbol
Unlocking the unit.
To unlock the unit and display the lock information, remove the battery cover,
using the pin press the concealed switch once and you will hear a single bleep,
this indicates the unit is now unlocked. The information for time in use and the
average m A current used can be read on the front of the LCD display as seen on
the picture below (unlock screen for TENS P06). Once the information is noted
press the SET/ESC button to bring the unit back to the Home position.
Average mA level
on Channel A
NeuroTrac™ IFC Rehab Operation Manual
NeuroTrac™ IFC
appears on LCD.
Average mA level
on Channel B
27
Rehab, which
Accumulated
time the pro�
gramme was
used since Lock