Load Fail-Safe Defaults Option; Load Optimized Defaults Option - ECS L4S8A Manual

Over Clock Function
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
CPU Frequency
Over CPU Vcore Function
Over DDR Vcc Function
CPU: DRAM Frequency Ratio
DRAM Frequency
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
CPU Frequency (Default)
Use the CPU Host Clock to set the frontside bus frequency for the installed
processor (usually 133 MHz, 100 MHz or 66 MHz).
CPU: DRAM Frequency Ratio (SPD)
This item controls the ratio of the CPU FSB clock and DRAM Frequency to
enable the CPU and DRAM to run at different frequency combination.

Load Fail-Safe Defaults Option

This option opens a dialog box that lets you install fail-safe defaults for all ap-
propriate items in the Setup Utility:
Press <Y> and then <Enter> to install the defaults. Press <N> and then <En-
ter> to not install the defaults. The fail-safe defaults place no great demands
on the system and are generally stable. If your system is not functioning cor-
rectly, try installing the fail-safe defaults as a first step in getting your system
working properly again. If you only want to install fail-safe defaults for a spe-
cific option, select and display that option, and then press <F6>.

Load Optimized Defaults Option

This option opens a dialog box that lets you install optimized defaults for all
appropriate items in the Setup Utility. Press <Y> and then <Enter> to install
the defaults. Press <N> and then <Enter> to not install the defaults. The opti-
mized defaults place demands on the system that may be greater than the
performance level of the components, such as the CPU and the memory. You
can cause fatal errors or instability if you install the optimized defaults when
your hardware does not support them. If you only want to install setup defaults
for a specific option, select and display that option, and then press <F7>.
Over Clock Function
[100]
[Normal]
Menu Level
[Normal]
[SPD]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
50
Item Help
F1:General Help