ECS L4S8A Manual page 44

SIS OnChip PCI Device
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
SIS USB Controller
USB Ports Number
USB 2.0 Support
USB Keyboard Support
SIS AC97 AUDIO
SIS S/W Modem
SIS 10/100M ETHERNET
Onboard LAN Boot ROM
SIS 1394 Controller
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
SIS USB Controller (Enabled)
This item enables the USB controller. Leave this at the default "Enabled" if
you want to connect USB devices to your computer.
USB Ports Number (6 Ports)
This item enables you to determine the number of USB ports.
USB 2.0 Support (Enabled)
Enable this item if your system supports USB 2.0
USB Keyboard Support (Disabled)
Enable this item if you plan to use a keyboard connected through the USB port in
a legacy operating system (such as DOS) that does not support Plug and Play.
SIS AC97 AUDIO (Enabled)
This option allows you to control the onboard AC97 audio. Disable this item if
you are going to install a PCI audio add-on card.
SIS S/W Modem (Enabled)
This option allows you to control the onboard S/W modem. Disable this item if
you are going to install an external modem.
SIS 10/100M ETHERNET (Enabled)
This option allows you to control the onboard LAN.
Onboard LAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the onboard LAN or a
network add-in card with a remote boot ROM installed.
SIS 1394 Controller (Disabled)
This option allows you to control the onboard 1394 controller.
SIS OnChip PCI Device
[Enabled ]
[6 Ports]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
40
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults