V-ZUG WineCooler V4000 90 Operating Instructions Manual page 24

10 Trouble-shooting
Malfunction
The temperature
zones and the cool-
ing compartments
flash and/or an
acoustic signal is
emitted.
Cooling compartment
illumination is on
when the door is
closed.
Error messages
F10–F15
Error messages A3,
A4, A5
Error message F_ _
24
Possible cause
▪ The cooling compartment
temperature is 8 °C
higher than the set tem-
perature.
▪ There has been a power
failure. The flashing tem-
perature display shows
the actual temperature
value of the appliance.
▪ The frequent appearance
of warnings indicates a
technical problem.
▪ Permanent interior illumin-
ation is active.
▪ Temperature sensor is
faulty.
▪ Ambient temperature out-
side operating range of
10–43 °C.
▪ Various situations can
lead to an F message.
Solution/Measures
▸ Touch any button.
– The current temperature value
is displayed; the cooling com-
partment flashes until the set
temperature is reached.
▸ If there is no warm bottle in the
appliance: Contact Customer Ser-
vices.
▸ Touch any button.
– The set temperature is shown
in the temperature display.
▸ Contact Customer Services.
▸ Deactivate permanent interior illu-
mination.
▸ Contact Customer Services.
– The appliance switches to the
emergency mode. The appli-
ance continues to cool, but it
cannot detect the current tem-
perature value and cannot guar-
antee that the temperature is
controlled at the selected set
value.
▸ Bring the temperature of the
room where the appliance is in-
stalled to within the operating
range of 10–43 °C.
▸ Contact Customer Services.