Selector Work Flow - Agilent Technologies 8860 User Manual

Gas sample selector

Hide thumbs Also See for 8860:

Table of Contents

Selector Work Flow

1 Connect the samples to the selector. Note the numbered position for

2 For sample bags: If needed, use the sampling mode from Maintenance

3 Create a sequence. Use the sample position as the vial number in the sequence,

4 Run the sequence.

5 Remove the samples from the selector.

6 Use a maintenance mode as needed to purge the Selector of residual sample.

Agilent Gas Sample Selector for 8860 and 8890 User Manual

each sample.

operation to prepare the Selector. See

and choose Selector as the injection source.

Selector Work Flow

Sampling mode

for more details.

Operation

Table of Contents

8890