Agilent Technologies 8860 User Manual page 41

Do not use liquid leak detection fluid on the vent line or allow liquid to enter the
C AUTI ON
vent line. Liquid and condensation in the vent line can cause backpressure and
can be pulled into the Selector and damage the instrument.
10 Connect the USB cable from the Selector USB COM connector to the GC. Use
11 Connect the Selector power adapter to the Power connector on the back of the
Agilent Gas Sample Selector for 8860 and 8890 Safety and Installation Manual
either USB connector on the GC.
Selector, and then to the power outlet.
Installation 3
Procedure
41