M3900 Series Kba Installation Sheet - Nortel Meridian SL-100 Reference Manual

9
Procedure 10-10 describes how to install a second KBA for the M3900 series
sets. Add up to 2 KBAs to provide a total of 44 additional line/feature keys.
Procedure 10-10 Installing the Key-based Expansion Module Accessory
1
2
3
4
5

M3900 Series KBA Installation Sheet

Configure the MSL-100 for the Key-based Expansion Module Accessory.
Table 10-5
Configure in Servord
Prompt
ADO
Line
OPTKEY
OPTION
KBA_COUNT
Note: Each Kay-based Expansion Module provides 22 additional Line/Feature
Keys. These additional keys are configured in Servord. Key numbers associated
with the first Key-based Expansion Module are 33 through 54. Key numbers for the
second Key-based Expansion Module are 55 through 76.
Hook the Module footstand into the telephone footstand, and carefully turn
the new assembly upright.
Place the telephone and the two Modules face down on a non-abrasive
surface.
Plug the cable from the second Module into the 10-pin slot on the first Module.
Thread the cable through the routing clips on both Modules, as shown above
Insert the clips on the second Module into the hinges on the second Module
footstand, then while squeezing the Module tilt handle, swing the footstand
into the desired position.
Hook the second Module footstand into the first Module footstand, and turn
the new assembly upright.
Response
x..x
1
KBA
1-2
MSL-100 M3900 Meridian Digital Telephones Reference Guide MSL15
Installation 10-25
Description
Line or DN.
x..x = Line or DN number.
Option Key
Key-based Expansion
Module Accessory.
Number of KBAs.
1 - KBA.
2 - two KBAs