Nortel Meridian SL-100 Reference Manual page 56

7-6 M3904 professional telephone
•
•
•
•
•
•
•
•
•
•
Goodbye key
Use the goodbye key to terminate an active call.
Hold key
Press the hold key to place an active call on hold. The feature key label of the
held line displays an icon showing the call is on hold. Press the line key to
return to the call on hold.
555-4001-136 Standard 04.02 May 2001
area code set-up — allows the user to enter area codes or prefixes to be
used by the callers list. If this option is enabled, the callers list shows local
numbers withoug the area code or internal numbers as extensions.
Note: the area code data is stored in the callers list record, and it is
displayed in brackets after the number.
call timer enable — automatically time all calls and display the time for 10
seconds after the call disconnects
date/time format — choose the time and date format to display when the
phone is idle
key click enable — provide audible feedback when using the dial pad (no
feedback is given when the option is off)
headset port on call — enable or disable the call in progress indication
feature. This feature requires a lamp-type accessory to be connected to the
headset port of the terminal, which is signaled by the terminal while a call
is in progress. The terminal turns on the accessory lamp while calls are in
progress, and turns the lamp off once the call is terminated.
headset port external alerter — enable or disable the external alerter
feature. This feature depends on connecting an external alerter to the
headset port of the terminal. If enabled, the terminal signals the external
alerter when the PBX has turned alerting on. Both the on call and external
alerter features may be enabled simultaneously.
Note: This feature is reserved for future third party equipment.
call indicator light — allows the user to turn on or off the call indicator
light.
on-hook default path — open the voice path automatically to headset or
handsfree
display diagnostics — provide a display self diagnostic test
group listening control — activate and deactivate group listening