Goodbye Key; Hold Key; Mute Key And Indicator; Headset With Led - Nortel Meridian SL-100 Reference Manual

8-6 M3905 ACD telephone
•
•
•
•
The options key cannot be assigned to a DN or feature key.

Goodbye key

The Goodbye key can be used to terminate an active call.

Hold key

A user can place an active call on hold by pressing the Hold key. The feature
key label of the held line displays an icon that shows that the call is on hold. A
user can return to the call that is on hold by pressing the Line key for which the
call is on hold.

Mute key and indicator

By pressing the Mute key, the user can mute the voice transmit path. While in
handsfree mode, the microphone is muted. When in mute mode, the mute
indicator flashes. To turn the voice transmit path on again, the user can press
the Mute key a second time.

Headset with LED

This key activates the set for headset use. The LED alerts the user that the set
is in headset mode.

Quit key

The quit key is used for applications and features.
555-4001-136 Standard 04.02 May 2001
headset port on call — enable or disable the call in progress indication
feature. This feature requires a lamp-type accessory to be connected to the
headset port of the terminal, which is signaled by the terminal while a call
is in progress. The terminal turns on the accessory lamp while calls are in
progress, and turns the lamp off once the call is terminated.
headset port external alerter— enable or disable the external alerter
feature. This feature depends on connecting an external alerter to the
headset port of the terminal. If enabled, the terminal signals the external
alerter when the PBX has turned alerting on. Both the on call and external
alerter features may be enabled simultaneously.
Note: This feature is reserved for future third party equipment.
call indicator light — allows the user to turn on of or off the call indicator
light
display diagnostics — provide a display self diagnostic test