Njoy Keen Series User Manual page 4

Keen 1000/1500/2000 - Front View / Back View
1
6
1.
Power On/Off Button: Press the switch for 2 seconds to turn the
UPS ON or OFF. Alarm setting: The audible alarm can be turned OFF
or ON by quickly pressing the POWER button twice. The default
setting is for the Alarm On.
2. LED Indicators: This LED is illuminated when the UPS is working.
3. Input Power Cord: Connect to utility power.
4.
AC outlet: The UPS provides outlets for connected equipment to
insure temporary uninterrupted operation during a power failure
and against surges and spikes.
5. AC Mode LED: The green LED will light when utility power is normal.
6. Battery Mode LED: The yellow LED will light when input power is
abnormal and the unit will work in battery mode.
7. Fault LED: The red LED will light when fault or over load occurs.
8. Input Circuit Breaker: The circuit breaker provides optimal overload
protection.
4
5 7
9 10
8
BREAKER
3
4