Table of Contents
Advertisement
5
DC Jack installation
Install procedure:
Plug Adapter into DC Jack connector.
After the EVK power is turned on, pay attention to the LED indicator is lighted on.
In normal condition, there are total 4 LED indicators will light, please refer the
marks of above picture.
MediaTek Proprietary and Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Genio
350 Evaluation Kit Quick Start Guide
Genio 350 EVK
Page 8 of 12
Advertisement
Table of Contents
