6
LCM/Touch Panel installation (1/2)
Install procedure:
Step1: Remove paper tape of the LCM/Touch Panel to release 2 FPC cables, as picture 1.
Step2: Insert the LCM FPC cable one terminal into the FPC connector of the LCM/Touch Panel, as
picture 2. After cable inserted, the FPC connector must be pressed down firmly.
MediaTek Proprietary and Confidential
[picture 1]
[picture 2]
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document,
in whole or in part, is strictly prohibited.
Genio
350 Evaluation Kit Quick Start Guide
Genio 350 EVK
Page 9 of 12