Timbres Parameter - Korg iM1 Owner's Manual

TIMBRES Parameter

These parameters allow you to select the Program used by
each Track, as well as control the output level, pan, and out-
put destination of each Track.
MIDI Indicator Timbre ON/OFF
Track Select
Track Select..................................................................................... [1...8]
There are up to eight Tracks available in the Multi mode. To
choose an individual Track to edit, tap one of the eight Track
Select buttons in the column at the left-hand side of the
parameter area.
Available Parameters by Mode
When you tap the on-screen keyboard-or drag the pitch bend
or modulation wheel-MIDI messages will be transmitted on
the MIDI channel of the Track that you've selected here. If
you're controlling the iM1 for iPad from an external MIDI
device, you won't hear anything unless the MIDI channel of
your external MIDI device matches the MIDI channel of the
selected Track. The same applies to the pitch bend wheel and
modulation wheel.
The editing area at the right will show the parameters (as
determined by the Track Select buttons) of the Program used
by the selected Track, and allow them to be edited.
MIDI Indicator (Track indicator)
When a Track receives MIDI messages from the on-screen
keyboard or pitch bend wheel etc., or from an external MIDI
device, the number of that Track (i.e., the Track of the match-
ing MIDI Channel) will light. However, this indicator will not
light in response to incoming MIDI realtime messages.
TIMBRE ON/OFF .............................................................................[OFF, ON]
These buttons are used to choose which Tracks will play. If
the Track is Off, no information is displayed, and this Track
will not produce any sound.
SOLO.............................................................................................[OFF, ON]
Only the Tracks(s) that is soloed will sound. By soloing a Tim-
bre, you can isolate it for easy editing.
48