Korg iM1 Owner's Manual page 29

OSC
OSC MODE ............................................................. [SINGLE, DOUBLE, DRUM]
This parameter selects the oscillator mode.
MULTISOUND 1/MULTISOUND 2/DRUMKIT.....................................[BROWSER]
Tap here to open the Browser to select a multisound or Drum
Kit. Refer to "The Browser" on page 14
LEVEL...........................................................................................[00...99]
This parameter specifies the oscillator's output level.
VDF
VDF SELECT
Use this function to determine whether VDF1 or VDF2 will be
shown in the active editing display.
CUTOFF ........................................................................................[00...99]
This parameter specifies the cutoff frequency. Drag the point
in the graphic.
RESONANCE ..................................................................................[00...99]
This parameter specifies the resonance. Drag the point in the
graphic.
RESONANCE Switch ....................................................................... [OFF, ON]
This parameter turns the filter resonance on or off.
Refer to "RESONANCE Switch" on page 37
Available Parameters by Mode
EG INT 1 ...................................................................................... [00...99]
This parameter specifies how deeply the VDF EG1 will be
applied.
EG INT 2 ....................................................................................... [00...99]
This parameter specifies how deeply the VDF EG2 will be
applied.
29