Korg iM1 Owner's Manual page 33

DELAY START.................................................................................[00...99]
This parameter specifies the delay time between the note-on
message and when Oscillator 2 begins to sound.
The other OSC 2 parameters are the same as for OSC1.
Drum Parameters
When the OSC MODE value is set to DRUMS, the following
screen will appear:
Available Parameters by Mode
DRUMS
DRUM KIT SELECT....................................................................... [BROWSER]
Tap the Drum Kit name to access the Browser and make your
selection. (Refer to "The Browser" on page 14).
OSC LEVEL .................................................................................... [00...99]
This parameter specifies the oscillator's output level.
OCTAVE ........................................................................................[4' , 8' , 16']
Use this parameter to select the octave setting of the oscilla-
tor.
PITCH EG
The shape of the Pitch EG can be easily modified by simply
dragging the points of the graphical envelope in the display.
(Refer to "Graphical envelopes" on page 11)
Refer to M1 owner's manual PDF, page 24 "F1-1: OSC1 PITCH
EG"
VEL SENS
EG INT...........................................................................[–99...+00...+99]
This parameter specifies how velocity will affect the depth of
the EG.
EG TIME ........................................................................[–99...+00...+99]
This parameter specifies how velocity will affect the speed of
the EG.
33