Advertisement
CLX3300 Series with BHSS Trim
Installation Instructions
Install Inside and Outside Escutcheon & Lever Assemblies
8
1. Align and insert inside spring housing onto the installed lockbody.
2. Install (2) #12-24 x 1-1/2" screws to tighten the spring housing to the door.
3. Mount inside escutcheon and lever assembly over the inside spring housing.
4. Mount outside escutcheon and lever assembly over the outside spring housing.
5. Secure the assemblies using the (3) screws #10-24 x 3-1/2" (Figure 10)
Figure 10
9
Cylinder Options
a
Lever to Accept Schlage
1. Provided less cylinder.
2. Depress cap pin and unscrew end cap to remove tailpiece from
competitor's cylinder. (Figure 11)
3. Insert new tailpiece in orientation shown.
4. Reassemble end cap over new tailpiece.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com • www.corbinrusswin.com
Copyright © 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in part without the express written permission of ASSA ABLOY Access
and Egress Hardware Group, Inc. is prohibited.
Screws (2) #12-24 x 1-1/2"
or Yale
Fixed Core Cylinder (M06 or YC Option)
®
®
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information go
to www.P65warnings.ca.gov.
Screws (3) #10-24 x 3-1/2"
Competitor's
Cylinder
Figure 11
Cap Pin
End Cap
FM589 07/22
Advertisement
