TE Connectivity CBP-5T Mk II Customer's Manual page 55

Clock Icon Button– This button opens the "Then"/"Else" Time Settings window. If no settings are
entered in this window, default "Duration" values will be used based on the "Output Type" selected.
"Duration" – This entry field specifies the time in milliseconds that the operation will executed the
output operation. The most common use of this would be to pulse or set a digital output to a certain
state for a limited amount of time. A value of "0" can be used to set an indefinite duration.
"Then"/"Else" Complete Action– This dropdown selects how the respective output operation will
complete after performing its task (see Figure 52). There are four possible completion "Actions".
Complete: After executing the "Then" or "Else" operation, the condition will complete successfully
and the next step in the press sequence will execute.
Error: After executing the "Then" or "Else" operation, the condition will complete and abort the
press sequence. The first step in the press sequence will be loaded and executed.
Next Step: (Only available for multi-step conditions) After executing the "Then" or "Else" operation,
the next step in the condition will be executed.
Goto Step n: (Only available for multi-step conditions) After executing the "Then" or "Else"
operation, step n in the condition will be executed.
JavaScript Viewer Tab – (Hidden for most users) This tab contains a read-only text window that can be
used to view the script that is generated by the condition steps specified in the "When/Then/Else Editor"
tab. This is primarily useful for advanced debug and analysis of a condition.
Examples
Measure Board Thickness – This condition implements a commonly used board pressing feature that
measure the circuit board thickness using a measurement probe. Standard Template Conditions
cannot be modified (see Figure 53), but they can be copied, modified, and saved under a different
name as needed.
Rev C
Figure 52
Figure 53
409-35001
55 of 92