TE Connectivity CBP-5T Mk II Customer's Manual page 53

Close Messages – This message type closes any open message dialog boxes on the
screen.
Clear Action Button – This message type clears any specialized messages
(messages displayed using a "Condition") from the production "Action" button and
status box.
"Message Class"– This dropdown selects the color styling of the message (not available
for "Close Message" or "Clear Action Button").
Info– Blue colored message styling
Error– Red colored message styling
Warning– Yellow/Gold colored message styling
Success– Green colored message styling
"Message Title"– (only available for "Acknowledge" and "Info" type messages) This entry
field specifies the text that is displayed in the header portion of the dialog message box.
"Message Text"– (only available for "Acknowledge" and "Info" type messages) This entry
field specifies the text displayed in the primary message body of the dialog message box.
The "${data}" variable can be used in the message text to display any result data passed
from the "When" operation (if enabled).
"Button Prompt"– (Disabled Action Button message types only) This entry field specifies
the text displayed in the main button area of the action button.
"Status Text"– (Disabled Action Button message types only) This entry field specifies the
text displayed in the status box area below the action button.
"Display data passed from "When" result using ${data} variable"– This checkbox
enables the data display feature that allows result data from the "When" operation to be
displayed in the message text using the "${data}" variable (not available for "Close
Message" or "Clear Action Button").
Preview- Pressing this button will open a preview of the message based on the settings
selected in the "Message Editor"
Clearance Move– This output type is used to move to the tool clearance height of the currently
loaded connector press independent from the currently loaded press (when a press step is
executed, the press will move to tool clearance or prompt the user to move to tool clearance by
default).
"Speed"– This entry field specifies the speed at which the press will move to clearance.
Digital Output– This output type is used to set the status of one of the machine digital outputs.
"Number"– This dropdown selects which Digital Output channel to set. All available outputs
will be listed in the dropdown.
"Output State"– This dropdown selects the output state that the "Then"/"Else" operation will
set the specified output to. The output state can be either "1" (on), or "0" (off).
COM Port– This output type is used to send output data to USB serial COM port devices
connected to the machine.
"COM Port Settings"– This button opens the "Then"/"Else" COM Port Settings window where
communication settings for the COM port device can be entered. Selecting "OK" will store the
settings entered, and selecting "Cancel" will discard changes to the settings.
"Port Number"– This dropdown selects which COM port device to send data to. Only
available COM ports will be listed.
Rev C
409-35001
53 of 92