Lorex LH314 Instruction Manual page 72

Appendix B: Setting up Local and Remote Viewing
I have configured DDNS for remote access to my system:
Go to www.lorexddns.net and create a new account
Domain: ____________________________________
User ID: ____________________________________
Password: __________________________________
I have configured my system to connect to the DDNS server:
MUST
ATTENTION: You
attempting remote access.
To enable DDNS on your system:
1. Open Internet Explorer (version 6 or above) and enter the IP address of your DVR in the
address bar (i.e. 192.168.xxx.89). DVR Netviewer opens.
2. Log in using your LAN user ID and password (by default, ID 9; password 3333).
3. Click the Setup button
4. Under Network, click DDNS.
5. Under DDNS Select, click the drop-down menu and select http://lorexddns.net
6. In the corresponding text fields, enter your DDNS username and password.
NOTE: Obtain this information from the confirmation email after registering for the free Lorex
DDNS service.
7. Under DDNS Domain Name, enter only the first portion of your DDNS domain from the
confirmation email. For example, if your domain name is tomsmith@lorexddns.net, you only
need to enter tomsmith
8. Click Submit to save your settings or click Cancel to exit without saving.
NOTE:
Once you have saved your DDNS settings, your must reset your DVR in order for the changes to
take effect. Disconnect and reconnect the power cable from the rear panel to reset.
I can access my system from a remote PC:
To access your system remotely:
1. Open Internet Explorer and enter your DDNS address from the confirmation email. For
tomsmith.lorexddns.net
example,
2. Log in using your LAN user ID and password (by default, ID 9; password 3333).
60
enter your DDNS information
The Setup menu opens.
.
in the text field.
LOCALLY
before