Lorex LH314 Instruction Manual page 38

Using the Main Menu
• Record Mode: Select one of the following:
Single-Way: The system
stops recording when the internal
hard drive is full.
Overwrite: The system
continues recording when the
internal hard drive is full by
overwriting the oldest recorded
data.
No Record: The system
not record.
3. To exit, right-click until you return to the
main screen.
8/16-channel
Figure 12.3 Record menu (8/16-channel)
NOTE:
As you make changes to the recording
parameters, the storage calculator at the
bottom of the menu displays the time remaining
on the hard drive.
To configure record settings:
1. From the Main Menu, click
Record menu opens.
2. Configure the following:
26
• Record Mode: Click to select one of the
following:
does
• Frame Rate: Set the frame rates for
alarm/motion, working hour, and
non-working hour:
Figure 12.4 Frame Rate menu (8/16-channel only)
. The
Single-Way: The system
stops recording when the internal
hard drive is full.
Overwrite: The system
continues recording when the
internal hard drive is full by
overwriting the oldest recorded
data.
No Record: The system
not
record.
Alarm/Motion Rate: Click under
each camera and select X, 2, 3, 5,
7.5, 10, or 15 (fps).
Working Hour Rate: Click under
each camera and select 0, 2, 3, 5,
7.5, 10, or 15 (fps).
does