Lorex LH314 Instruction Manual page 19

Remote Control (cont'd.)
The remote control is the secondary input
device for navigating the system's graphical
user interface.
To use the remote control:
MENU
1. : Opens the system main menu.
2. : From full-screen single channel
view, changes display view to Quad
4-channel only
split-screen (
3. /CH+: Move cursor in menus up;
Channel Up.
4. /FWD: Move cursor in menus right;
during playback, increase forward
playback speed (5X, 15X, 60X).
5. /REW: Move cursor in menus left;
during playback, increase reverse
playback speed (5X, 15X, 60X)
6. / : Start/pause forward playback.
7. /CH-: Move cursor in menus down;
Channel down.
8. : Confirm menu selections.
9. ESC: Go back / exit menus.
10. OSD: Show/hide the on-screen display.
11. LIST: Open the Event List menu.
12. : While in Event List menu, press to delete a selected event (no confirm or undo).
13. : Decrease value of selected menu option.
14. : Increase value of selected menu option.
*Remote control included with the system may vary depending on model.
*
1
3
5
7
).
9
11
13
Figure 3.1 Remote Control
Getting Started
2
4
6
8
10
12
14
7