Security Menu - JETWAY MI12-00V Series User Manual

System State after Power Failure
Use this item to specify what state to go to when power re-applied after a power failure
(G3 state).
The optional settings are: [Always On]; [Always Off]; [Former State].

3-9 Security Menu

Security menu allow users to change administrator password and user password settings.
Administrator Password
If there is no password present on system, please press [Enter] to create new administrator
password. If password is present on system, please press [Enter] to verify old password then
to clear/change password. Press again to confirm the new administrator password.
User Password
If there is no password present on system, please press [Enter] to create new administrator
password. If password is present on system, please press [Enter] to verify old password then
to clear/change password. Press again to confirm the new administrator password.
 Secure Boot
Press [Enter] to make customized secure settings:
46