infobit iTrans DP-BOX-202 Manual page 20

savepresetaudio
loadpresetaudio
reset
getaudiolevels
getsettings
getdeviceinfo
getdantelock
getsignals
getchannellabel
aes67on
aes67off
Save the current setting (input gain,
output volume, phantom power
status, mute status) to preset.
Use the saved preset.
Factory reset the unit.
Query the status of the audio.
Query the settings of audio.
Query the status of the unit.
Model, name, version, Mac address.
Query the lock status of the unit.
Query the status of the audio.
(Invalid signal/Signal clipping/Valid
signal /No signal)
Query the label of channel.
Enable AES67
Disable AES67
16
ok/error
ok/error
ok/error
ligain,1:4 24dB
ligain,2:4 24dB
lovol,1:40
lovol,2:40
ligain,1:4 24dB
ligain,2:4 24dB
phantom,1:on
phantom,2:on
lovol,1:40
lovol,2:40
mute,1:off
mute,2:off
Model:2x2 Dante
Interface
Name:iTrans DP-BOX-
202-C93512
MAC:44-33-4C-C9-35-12
Dante Version:4.2.2
GUI Version:1.0.0
Firmware Version:1.0.0
DanteLock:unlock
Input1:Nosignal
Input2:No signal
Output1:Valid signal
Output2:Valid signal
Input1 TX1
Input2 TX2
Output1 RX1
Output2 RX2
ok/error
ok/error