Individual Setup; Gateway Mode; Setting Forwarding Address; Trunked Mode - Motorola TETRA MTM5000 Series User Manual

68015000180-MR
Chapter 4 : Main Menu
4.9

Individual Setup

This menu item allows you to set call settings for individual calls.
4.9.1

Gateway Mode

This sub-menu item allows you to set a forwarding address for incoming calls in Gateway mode.
4.9.1.1

Setting Forwarding Address

Procedure:
1 From the home screen, press the Menu key.
2 Select Individual Setup→Gateway Mode→Forwarding Address.
3 Enter the number where the call is to be forward to and press OK.
4.9.2

Trunked Mode

This sub-menu allows you to set call waiting and call forwarding for your radio.
4.9.2.1

Enabling or Disabling Call Waiting

When and where to use: To enable or disable Call Waiting for your radio.
Procedure:
1 From the home screen, press the Menu key.
2 Select Individual Setup→Trunked Mode→Call Waiting.
3 Select On to enable Call Waiting, or Off to disable it.
4.9.2.2

Setting Call Forwarding

When and where to use: To enable or disable Call Forwarding for your radio. If radio is not in TMO
mode, selecting call forwarding will results in an Invalid Keypress tone and Service Restricted
message.
Procedure:
1 From the home screen, press the Menu key.
2 Select Individual Setup→Trunked Mode→Call Forwarding.
3 Select one of the following options:
• Config Sending – Enable or disable call forwarding. Select On to enable call forwarding.
• Config – Set predefined condition messages for calling radio. You can select more than one
messages:
• Always
• Busy
110